JKS 9603 - Manual

JKS9603 JKS Bar Pin Eliminator Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Bar Pin Eliminators ™
Part Number: JKS9603
Welcome
CONGRATULATIONS on purchasing new Bar Pin
Eliminators from JKS Manufacturing. We are commit-
ted to providing you with the best products available
and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Important
NOT COMPATIBLE WITH Old Man Emu™ shock
absorbers.
INSTALLATION OF BAR PIN ELIMINATORS effec-
tively reduces the static length of shock absorber
by 0.40”.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Wheel Bearing Grease
 Bench Vice or C-Clamp
 Hammer and Punch *
 Sanding or Grinding Wheel *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part # QTY
A Cross Pin 03073 2
B Mounting Block 03072 4
C 5/16” x 1-3/4” Bolt 15060 4
D 5/16” Nylock Nut 37021 4
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036