JKS OGS166 - Manual

JKSOGS166 JKS Front Trackbar + Sector Shaft Reinforcement Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Front Trackbar + Sector Shaft Reinforcement Kit
Part Number: JKSOGS166
Applications: Wrangler JK, 2007+
Welcome
CONGRATULATIONS on purchasing the Front
Trackbar + Steering Sector Shaft Reinforcement Kit
from JKS Manufacturing. We are committed to pro-
viding you with the best products available and your
satisfaction is our first priority.
Important
INSTALLATION REQUIRES WELDING by a quali-
fied welder or metal fabricator. A bolt-on installa-
tion is not possible for this product.
INSTALLATION REQUIRES OE type steering box.
NOT COMPATIBLE WITH TeraFlex track bars.
NOT COMPATIBLE WITH frame-mounted track bar
drop brackets.
Tools Required
 Hydraulic Floor Jack & Jack Stands
 Metric/Standard Socket Wrench Set
 Torque Wrench
 15/16” Open End Wrench
 Black Marker or Metal Scribe
 Flat Black Spray Paint
 Anti-Seize Lubricant
 Compact Die Grinder with Sanding Wheel (or
equivalent tool for removing paint from chassis)
 Welding Equipment
 Assortment of Small Pry Bars *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036