Sper Scientific 850038 Pure Water Meter User Manual
Page 27
Select the auto endpoint "off" to
deactivate this feature.
auto endpoint
Press
UP/DOWN to switch
function on or off (Fig. S). Press
ENTER to confirm the last state and
select P2.4 automatically.
P2.4: ATC or non-ATC: (Atc)
P2.4 allows you to select Automatic
or Manual Temperature Compensation.
The default is ATC.
utomatic
temperature compensation on or off
(Fig. T).
NOTE:
The
default is "Ready Indicator on",
"auto endpoint function off" &
"ATC on"
Press UP/DOWN to switch a
Press ENTER to confirm the last state
and return to P2.0.
P2.3: Auto endpoint function:(AEP)
Fig. S
Fig. T
26
P2.3 lets you switch on or off the
"Auto endpoint function". Select auto
endpoint "on" to HOLD your
measurement when it is stable for
more than 5 seconds. The display
value will freeze and the HLD indicator
will appear on the LCD. Press the
HLD key again to release the display.