Sper Scientific 850038 Pure Water Meter - Manual (Page 42)

Type Default Parameters Remark
P0.1
IRDA
Output
P1.1
P1.2
P1.3
P1.4
P1.5
Manual
range
setting
OFF
OFF
OFF
OFF
OFF The meter resets to
the Auto-ranging
function once it's
turned off
Appendix A: Meter Factory Default Setting
P3.1
P3.2 Select C/ F
Select ppm
or mg/L C
ppm Temp unit
TDS unit (only 8302,
8305,8306)
P4.1
P4.2
P4.3 Temp. coefficient
Nor. Temp
Manual compen-
sation temp.
2.1%/ C
25 C
25 C Adjustable from 0.0 to 10%
Adjustable from 15 to 30 C
Adjustable from 0~50.0 C
P5.1
P5.2 Cell const. Select
Cell const. Input Select K=1.0, 0.1 or 10
The input cell constant
offset is +20% of select
cell constant in
P5.1
1.0
1.0
P6.1 Clear Memory NO
Retain Memory
P7.1 Factory default NO Retain your current
settings
P8.1
P8.2
P8.3
P8.4
P8.5 Viewing
previous
calibration
data ---
---
---
---
--- No calibration data for 1st range
No calibration data for 2nd range
No calibration data for 3rd range
No calibration data for 4th range
No calibration data for 5th range
P9.1
P9.2
P9.3
P9.4
P9.5 No offset for effective cell constant (1st range)
No offset for effective cell constant (2nd range)
No offset for effective cell constant (3rd range)
No offset for effective cell constant (4th range)
No offset for effective cell constant (5th range)
---
---
---
---
---
Viewing
probe data
PA.1
PA.2
PA.3
PA.4
PA.5
PA.6 Real time
clock. Only
8303, 8306 NO Retain year of current RTC.
Retain month of current RTC.
Retain day of current RTC.
Retain hour of current RTC.
Retain minute of current RTC.
Retain second of current RTC.
40