Sper Scientific 850038 Pure Water Meter - Manual (Page 41)

RS232 OUTPUT: (9600 bps )
The meter can link with a PC to
capture on-line data and display
COND/TDS/SALT readings with
real-time output. You can
retrieve files, save the data for
data analysis, record statistics
and more.
Connection procedures:
 Plug the optional RS232 cable
into the RS232 jack port (on
the right side of the meter)
 Insert the D-sub 9P type
connector into computer's
Com. Port - OR-
 Set up RS232 software by
inserting the CD-ROM.
 When installing the RS232
software follow the procedures
in the operation manual.
 T h e RS232 protocol is:
9600 bps, 8data bits, noparity.
 The data format is:
Tx.ASCII code sent each
second while meter is on:
C***. **uS(mS):t***.*C(F):
D***. **ppm(ppt): S***.*ppt
@****-**-** **:**:**LRCCRLF
The error message format is:
ExxNul (xx is the error code).
 Memory data is not available
via RS232.
39