Vaisala viewLinc 4.3 - Manual (Page 18)

Connecting Devices
10 4 | 4 M211679EN-A
How connected : 802.11b/g Wi-Fi
Detail :
• Connect Devices wirelessly to the viewLinc server.
• Vaisala Wi-Fi Data Logger HMT140: Requires configuration
with an HMT140 Configuration Cable.
It is also possible to use a mix of these methods depending on your
system requirements.
Connecting Devices
This section outlines the five methods Loggers and Transmitters
(Devices) can connect to your viewLinc CMS.
For further graphical representation of how to install Devices, see
the Vaisala Veriteq viewLinc Quick Start Guide for networked
Devices.
To obtain a copy of the Quick Start Guide, see
http://www.vaisala.com/viewLinc, or call to request a copy of the
guide from your sales representative.
Method 1: Using vNet Devices
The following procedure describes how to use vNet Devices to
connect Vaisala Veriteq Loggers to your network.