Vaisala viewLinc 4.3 - Manual (Page 92)

Setting Up User-specific Views
84 4 | 4 M211679EN-A
To erase the Dashboard image and all data points:
IMPORTANT: The erase operation cannot be undone.
1 To erase the current dashboard, select Options | Erase Dash-
board .
2 At the confirmation message, click Yes.
Setting Up User-specific Views
The Locations screen can display User-specific Views, an easy way
for non-administrative Users to view only those Locations that
matter to them/their job function. Note that you require Manage
Views Right to create Views.
For example, you could create a View of all humidity or all
temperature Locations a User is permitted to view, regardless of the
Zone in which Devices are located. Once a new View is saved, the
Administrator assigns access to that View to a User or Group.
If you plan to use a remote display terminal, note that the displayed
content is defined by the View assigned to the User logged in, and
the Locations the User is permitted to access. For more information
about setting up a Remote Display, see “Using a Remote Display” on
page 151.
Once a View is set up, the User or Group can access their View in
the Locations window, by clicking in the dark Grey bar labeled,
Views
, at the bottom of the Locations tree pane.