Vaisala viewLinc 4.3 - Manual (Page 22)

Connecting Devices
14 4 | 4 M211679EN-A
Drivers: Install USB Drivers
Using the supplied Vaisala Veriteq USB cable driver CD and Quick
Start guide, install USB drivers on every PC you plan to attach
Devices to.
Hardware: Connect Hardware
1 Connect the Device to a Vaisala Veriteq USB cable.
2 Connect the USB cable to your viewLinc Server or Device Host
(ensure the viewLinc Server computer is attached to your net-
work).
3 Install a USB cable driver. You only need to install a driver once
on each machine to which Devices are connected.
Method 4: Using Serial Port
You can also connect Devices to PCs using a Serial Port. The
configuration using a Serial port is very similar to using USB (refer
to the diagram shown in, Method 3: Using USB Port).