Vaisala viewLinc 4.3 - Manual (Page 86)

Editing Location Properties
78 4 | 4 M211679EN-A
Note: You can assign access to subfolders on an individual basis.
6 Click Save .
The new permission appears in the Access Control list (Name
column) and access to the Location is assigned accordingly. To see
current permissions for other Zones, select a Zone or Location in the
Locations tree and the Access Control list updates automatically.
Setting Up Location Thresholds
You can configure one or more Thresholds for each Location, and the
Alarm settings to activate if a Threshold is reached.
Threshold settings can be applied with or without template, but a
Threshold template makes it easy to apply similar parameters to
several Locations. To create a single or multi-threshold template, see
“Threshold Templates” on page 56.
To set a threshold for a specific Location:
1 From the viewLinc desktop, choose Options | System Con-
figuration | Locations Manager
, then select the Location or
Locations you want to set the threshold alarm for.
Note: To select multiple Locations at one time, hold down the
[Ctrl] key while you select each Location. To select a
group of Locations in a list, hold down the [Shift] key
and select the first and last Locations. The Locations
Properties pane updates automatically.
2 Select the Thresholds tab, click Options| Create X
Threshold (where X represents the unit reading measured at
this Location or group of Locations, such as C or RH or mA).