Vaisala viewLinc 4.3 - Manual (Page 87)

Editing Location Properties
viewLinc 4.3 4 | 4 79
3 On the Edit Threshold screen, select a template in the Threshold
Template column (check the selection box), or create specific alarm
settings on the General Parameters, Notifications, and Comments
tabs, following steps 3 through 8 in “Threshold Templates” on
page 56.
4 Click Options | Save , or, if you are editing an HMT140 Wi-Fi
Data Logger, choose Options | Save and update Device alarm.
To edit a threshold:
When a Location Threshold or Threshold template is modified, all
associated active alarms are acknowledged and terminated automatically.
viewLinc applies the new Threshold settings once the next data scan
completes.
1 From the viewLinc desktop, choose Options | System Configuration
| Locations Manager
, and select a Location.
2 On the Location Properties pane, select the Thresholds tab.