Kenwood KDC-W9537U - Manual (Page 10)

10 | English
General features
Loudness
Compensating for low and high tones during low
volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
1 Enter Loudness mode
Using the Control knob, select "DSP" > "SND
CONT" > "LOUD".
For the operation method, refer to <Function
Control mode> (page 11).
2 Select the Loudness
Turn the Control knob.
Each time you push the knob, the Loudness turns
ON and OFF.
3 Exit Loudness mode
Press the Control knob.
In Audio file source
Supreme Setting
When AAC, MP3 or WMA files encoded at a low
bit rate (less than 128kbps (fs=44.1k, 48kHz)) are
played, this function restores their high frequency
region to approach the sound quality of equivalents
of these files encoded at a high bit rate. Processing
is optimized for the compression format used (AAC,
MP3, or WMA), and adjustment is made for the bit
rate used.
1 Enter Supreme Setting mode
Using the Control knob, select "DSP" > "SND
CONT" > "Supreme".
For the operation method, refer to <Function
Control mode> (page 11).
2 Select the Supreme
Turn the Control knob or push it towards left
or right.
Display Setting
"Supreme ON" Plays sound using the Supreme function.
"Supreme OFF" Plays the original sound stored in the audio file.
3 Exit Supreme Setting mode
Press the Control knob.
⁄
• The sound effect may be imperceptible depending
on the relationship between the audio file format and
setting.
• This function is not available on iPod.
TEL Mute
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <Connecting Wires to
Terminals> (page 50).
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward down for at least
2 seconds.
Each time you push the knob, Subwoofer output
switches ON and OFF.
When it is ON, "SUBWOOFER ON" is displayed.
B64-3773-00_00_E_English.indd 10 B64-3773-00_00_E_English.indd 10 07.5.10 5:18:23 PM 07.5.10 5:18:23 PM