Kenwood KDC-W9537U - Manual (Page 19)

English | 19
In Auxiliary input source
Information Display Condition
Auxiliary input name "Source Name" 1 4
Spectrum Analyzer & Clock "Speana/Clock" 345
Clock "Clock" 1 7
Date "Date" 1345 7
Blank "Blank" 1345 7
⁄
• See <Display Type Selection> (page 16) for the display
position of "Condition".
Display Type A/ Display Type B/ Display Type C
Font Color Selection
Selecting the display font color.
1 Enter Font Color Selection mode
Using the Control knob, select "DISPLAY" >
"COLOR".
For the operation method, refer to <Function
Control mode> (page 11).
2 Select the text display part
Select the character color/ outline color
(Display Type A only)
Push the Control knob towards up or down.
Display Setting
"FILL-IN" The color of the text fill.
"OUTLINE" The color of the text outline.
Select the row (only for display type with
multiple rows)
Push the Control knob towards up or down.
The cursor (
‰) moves to the selected text display
part.
3 Select the Font Color
Basic color (12 colors)
Push the Control knob towards right or left.
Detail color (115 colors)
Turn the Control knob.
4 Exit Font Color Selection mode
Press the Control knob.
Display Type C
Icon Display Switching
Changing the Icon Display.
1 Enter Icon select mode
Using the Control knob, select "DISPLAY" >
"SIDE".
2 Switch the Icon display
Turn the Control knob or push it towards left
or right.
Select from the following displays:
Icon display Display
Source graphic "Source"
Text label "Text"
Album art (iPod or "Music Editor" media) "Photograph"
3 Exit Icon select mode
Press the Control knob.
⁄
• The Album art display function is not used to display the
image corresponding to the tag recorded in the Audio
file.
• If Album art display is selected during playback of an
iPod or "Music Editor" media on which no album art is
recorded, a source icon is displayed.
• During Album art downloading, "Down-loading" is
displayed. Downloading requires a maximum of 30
seconds.
External Display Selection
Changing the display in the connected External
Display.
1 Enter External display select mode
Using the Control knob, select "DISPLAY" >
"OUT".
For the operation method, refer to <Function
Control mode> (page 11).
"Display Out Select" is displayed.
2 Select the display
Turn the Control knob or push it towards left
or right.
Select your desired display.
3 Exit display control mode
Press the Control knob.
B64-3773-00_00_E_English.indd 19 B64-3773-00_00_E_English.indd 19 07.5.10 5:18:29 PM 07.5.10 5:18:29 PM