Menu system – Kenwood KDC-W9537U User Manual
Page 46
46
|
English
Menu system
In Standby mode
Firmware version display
Displaying the firmware version with the unit.
Turn the Control knob.
Select the "F/W Version : " display.
In Internal Memory source
Internal Memory Format
Perform format to delete all audio files stored in
internal memory.
⁄
• The content of formatted memory cannot be restored.
Be careful when formatting.
1
Enter Internal Memory
Press the [SRC] button.
Select the "Internal Memory" display.
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 11).
3
Select the Internal Memory Format
Turn the Control knob.
Select the "INT.MEM.Format" display.
4
Enter the Formatting mode
Press the Control knob for at least 1 second.
"Format?" is displayed.
5
Start format
Select "YES" using the Control knob.
"Format..." display blinks.
When the formatting finishes, "Completed" is
displayed.
6
Exit Formatting mode
Press the [FNC] button.
In Standby mode
Demonstration mode setting
Sets the demonstration mode.
1
Select the Demonstration mode
Turn the Control knob.
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display
Setting
"DEMO Mode : ON"
The Demonstration mode function is ON.
"DEMO Mode : OFF"
Exit Demonstration mode (Normal mode).
B64-3773-00_00_E_English.indd 46
B64-3773-00_00_E_English.indd 46
07.5.10 5:18:44 PM
07.5.10 5:18:44 PM