Kenwood KDC-W9537U - Manual (Page 43)

English | 43
Restricting RDS Region (Region
Restrict Function)
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region.
Display Setting
"Regional : ON" The Region Restrict Function is ON.
"Regional : OFF" The Region Restrict Function is OFF.
⁄
• If AF function is not restricted to the specified region and
network, the AF function sets up to search the station
with good reception in the same RDS network.
Auto TP Seek
When the TI function is ON and the reception is
poor while listening to a traffic information station,
another traffic information station with better
reception will be searched for automatically.
Display Setting
"Auto TP Seek : ON" The Auto TP Seek Function is ON.
"Auto TP Seek : OFF" The Auto TP Seek Function is OFF.
In FM reception
Monaural Reception
You can reduce the noise when stereo broadcasts
are received as monaural.
Display Setting
"MONO : OFF" The monaural reception is OFF.
"MONO : ON" The monaural reception is ON.
Auxiliary Input Display Setting & Disc
Naming
Selecting the display when alternating to Auxiliary
input source. For the Disc Naming refer to the <Disc
Naming (DNPS)> (page 30).
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/ "AUX EXT" display.
Refer to <Selecting the Source> (page 8).
2 Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 11).
3 Select Auxiliary input display setting mode
Turn the Control knob.
Select the "Name Set" display.
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The selected Auxiliary input display is displayed.
5 Select the Auxiliary input display
Turn the Control knob or push it towards up or
down.
Each time you push the knob, the display alternates
as listed below.
• "AUX"/"AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
• "VIDEO"
• "TV"
6 Exit Auxiliary input display setting mode
Press the [FNC] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used.
B64-3773-00_00_E_English.indd 43 B64-3773-00_00_E_English.indd 43 07.5.10 5:18:43 PM 07.5.10 5:18:43 PM