Kenwood KDC-W9537U - Manual (Page 37)

English | 37
Menu system
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1 Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to <Function
Control mode> (page 11).
2 Select the menu item
Turn the Control knob or push it towards up or
down.
Example: When you want to set the beep sound
select the "Beep" display.
3 Set the menu item
Push the Control knob towards right or left.
Example: When you select "Beep", each time you
push the knob it alternates between
"Beep : ON" or "Beep : OFF". Select 1 of
them as the setting.
You can continue by returning to step 2 and
setting other items.
4 Exit Menu mode
Press the [FNC] button.
⁄
• When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
(<Manual Clock Adjustment> etc.) are entered step by
step.
FNC SRC
Control knob
Function icon
B64-3773-00_00_E_English.indd 37 B64-3773-00_00_E_English.indd 37 07.5.10 5:18:40 PM 07.5.10 5:18:40 PM