Kenwood KDC-W9537U - Manual (Page 39)

English | 39
In USB mode with iPod connected
iPod mode setting
Setting up the iPod operation method in File Select.
Display Setting
"iPod Mode : ON" Uses the operation method similar to that of
iPod.
"iPod Mode : OFF" Uses the operation method different from that
of iPod.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"Beep : ON" Beep is heard.
"Beep : OFF" Beep canceled.
In Standby mode
Manual Clock Adjustment
⁄
• You can do this adjustment when the <Synchronize
Clock> (page 40) is set as OFF.
1 Select Clock Adjustment mode
Turn the Control knob.
Select the "Clock Adjust" display.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Selecting the item (hours or minutes) to adjust
Push the Control knob towards right or left.
The items that are blinking are items that you can
adjust.
4 Adjust each item
Turn the Control knob or push it towards up or
down.
5 Exit Clock adjustment mode
Press the [FNC] button.
In Standby mode
Date Adjustment
1 Select Date Adjust mode
Turn the Control knob.
Select the "Date Adjust" display.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob towards right or left.
The items that are blinking are items that you can
adjust.
4 Adjust each item
Turn the Control knob or push it towards up or
down.
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [FNC] button.
In Standby mode
Date Mode
Setting the date format.
1 Select Date Mode
Turn the Control knob.
Select the "Date Mode" display.
2 Enter Date mode
Press the Control knob for at least 1 second.
3 Select the date format
Turn the Control knob or push it towards up or
down.
4 Exit Date mode
Press the [FNC] button.
B64-3773-00_00_E_English.indd 39 B64-3773-00_00_E_English.indd 39 07.5.10 5:18:41 PM 07.5.10 5:18:41 PM