General features, Sound management system 1 – Kenwood KDC-W9537U User Manual

Page 12

Advertising
background image

12

|

English

General features

Sound Management system

1

Enter Sound Management mode

Using the Control knob, select "DSP" > "S.M.S".
For the operation method, refer to <Function
Control mode> (page 11).

2

Select the Sound Management item to adjust

Turn the Control knob or push it towards left
or right.
Press the Control knob.

Icon

Sound Management Item

"CABIN"

Cabin Setting

"SPEAKER">"FRONT" >"LOCATION"

>"SIZE"
>"TWEETER"

Speaker Location Front
Speaker Size Front
Speaker Select Tweeter

>"REAR" >"LOCATION"

>"SIZE"

Speaker Location Rear
Speaker Size Rear

>"SUB-W" >"SIZE"

Speaker Size Subwoofer

"DTA"

>"FRONT"
>"REAR"
>"SUB-W"

DTA Front
DTA Rear
DTA Subwoofer

"X'OVER"* >"FRONT"

>"REAR"
>"SUB-W"

Front High Pass Filter
Rear High Pass Filter
Subwoofer Low Pass Filter

* The following adjustment items can be selected by up or

down knob for "X'OVER".

Icon

Display

Sound Management Item

>"FRONT" "fc"

Front High Pass Filter Cut off Frequency

"Slope"

Front High Pass Filter Slope

>"REAR"

"fc"

Rear High Pass Filter Cut off Frequency

"Slope"

Rear High Pass Filter Slope

>"SUB-W" "fc"

Subwoofer Low Pass Filter Cut off Frequency

"Slope"

Subwoofer Low Pass Filter Slope

"Phase"

Subwoofer Low Pass Filter Phase

• "CABIN"

Set the type of vehicle for the sound position setting of
the DSP.

• "SPEAKER"

Sets the size and location of the speakers.

• "DTA" (Digital Time Alignment).

Fine tune the difference in
distance between speakers
set with Cabin Setting. Use
together with <Position
Control> (page 13)

1 Set reference point so that the front/rear positions and

height are at the position of the ears of the person
sitting in the front seat and the left/right position is at
the center of the cabin.

2 Measure the distance from the reference point to the

speaker.

3 Calculate the difference in distance with reference to

the farthest speaker.

• "X'OVER" (Crossover Network Setup)

You can manually set a crossover frequency for the
speakers.

3

Adjust the Sound Management item

Turn the Control knob or push it towards left
or right.
Each time you push the knob, the setting alternates
between the settings shown in the table below.

"CABIN"

Sound Management Item

Range

Cabin Setting

OFF/ Compact/ Sedan/ Wagon/
Minivan/ SUV/ Passenger Van

"SPEAKER"

Sound Management Item

Range

Speaker Location Front

Door/ On Dash/ Under Dash

Speaker Size Front

16cm/ 17cm/ 18cm/ 4Ч6/ 5Ч7/ 6Ч8/
6Ч9/ 7Ч10/ O.E.M./ 10cm/ 13cm

Speaker Size Tweeter

None/ Use

Speaker Location Rear

• Door/ Rear Deck
• 2nd Row/ 3rd Row (Minivan/

Passenger Van)

Speaker Size Rear

16cm/ 17cm/ 18cm/ 4Ч6/ 5Ч7/
6Ч8/ 6Ч9/ 7Ч10/ None/ O.E.M./
10cm/ 13cm

Speaker Size Subwoofer

25cm/ 30cm/ 38cm Over/ None/
16cm/ 20cm

"DTA"

Sound Management Item

Range

DTA Front/
DTA Rear/
DTA Subwoofer

0 — 290 (cm)

B64-3773-00_00_E_English.indd 12

B64-3773-00_00_E_English.indd 12

07.5.10 5:18:24 PM

07.5.10 5:18:24 PM

Advertising