Kenwood KDC-W9537U - Manual (Page 21)

English | 21
Tuner features
Tuning
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Refer to <Selecting the Source> (page 8).
2 Select the band
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
3 Tune up or down band
Push the Control knob towards [ 4] or [¢].
⁄
• During reception of stereo stations the "ST" indicator is
ON.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Select the band
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
FM
AM
 D
FNC SRC AME
Control knob
Function icon
ST indicator
Band display Preset station number Frequency display
B64-3773-00_00_E_English.indd 21 B64-3773-00_00_E_English.indd 21 07.5.10 5:18:30 PM 07.5.10 5:18:30 PM