Kenwood KDC-W9537U - Manual (Page 50)

MUTE
EXT.
CONT
P.CONT
ANT.CONT
FRONT
SUB
WOOFER
REAR
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Battery wire (Yellow)
Ignition wire (Red)
To connect the Kenwood navigation system, consult your
navigation manual.
Wiring harness
(Accessory
1)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal when using the
optional power amplifier, or to the antenna control terminal in the
vehicle.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
A-–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
See next page
External amplifier control wire (Pink/Black)
To "EXT.AMP.CONT." terminal of the amplifier having the external
amp control function.
50 | English
Connecting Wires to Terminals
⁄
Sub Woofer left output (White)
Sub Woofer right output (Red)
Fuse (10A)
Rear left output (White)
Rear right output (Red)
Front left output (White)
Front right output (Red)
To connect these leads, refer to the relevant
instruction manuals.
To Kenwood disc changer/ External optional accessory
To USB device
USB connector (1 m)
⁄
• Do not remove the cap when you
do not use the USB cable. The
connector will cause the unit to
malfunction if it gets in touch with
any metallic part of the vehicle.
⁄
AUX input (Stereo)
Use the mini-plug which is stereo type and does not
have any resistance.
To External Display/
Steering remote
FM/AM antenna input
(JASO)
Antenna Cord
⁄
B64-3773-00_00_E_English.indd 50 B64-3773-00_00_E_English.indd 50 07.5.10 5:18:47 PM 07.5.10 5:18:47 PM