MagTek IntelliStripe65 99875161 - Manual (Page 85)

Section 10. OTI SCI 1000 Contactless Smart Card Application
79
Example Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 0E 84 00
RF OFF COMMAND
Command ID: 85 (Hex)
Description:
This command is used to turn the RF field OFF. When this command is accepted by the reader,
the automatic control of the RF will also be disabled
Request Message Data: None
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Example Request:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 00 0E 85 00
Example Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 0E 85 00
SENDING OTI MODULE TRANSPARENT COMMANDS
Command ID: 81 (Hex)
Description:
This command is used to send additional commands to the OTI module through the IS65
interface.
Request Message Data: None
Response Message Data: None
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.