Campbell Scientific RF401-series and RF430-series Spread Spectrum Data Radios/Modems - Manual (Page 35)

RF401-series and RF430-series Spread Spectrum Radio/Modems
(5) Select the port matching the COM or USB port on the PC in which the
radio is connected.
(6) Click on the “Connect” button on the bottom left of the DevConfig screen.
(7) Press the “Setup” button on the radio, and DevConfig will display the
Deployment panel—defaulting to the RF401/RF411/RF416 or
RF430/RF431/RF432 tab (see FIGURE 5-1).
(8) Click Apply after changing settings.
5.1.2 RF401/RF411/RF416 or RF430/RF431/RF432 Tab
FIGURE 5-1. Default DevConfig Screen for Setting Up the RF401
radios (OS4 or higher)
23