Allied Telesis AT-FS970M Series - Manual (Page 121)

121
Chapter 10
Setting Static Port Trunks
Static port trunks are groups of two to eight ports that act as single virtual
links between the switch and other network devices. This chapter
describes how to display, create, and modify static trunks. See the
following sections:
 “Overview” on page 122
 “Displaying Static Trunk Settings” on page 123
 “Adding Static Trunks” on page 125
 “Modifying the Static Trunk Settings” on page 127
 “Deleting Static Trunks” on page 129
For additional guidelines and information regarding static port trunks, see
the following chapters in the AT-FS970M Series Version 2.3.1.0
Management Software Command Line Interface User’s Guide:
 Static Port Trunks
 Static Port Trunk Commands