Allied Telesis AT-FS970M Series - Manual (Page 244)

Chapter 21: Setting Static Routes
244
Displaying Static Routes
To display the static routes, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 98.
Figure 98. Layer 3 Tab
2. From the Layer 3 tab drop-down menu, select Static Routes.
A list of static routes is displayed. See Figure 99.
Figure 99. Static Routes Page
The following fields are displayed:
 Network Address— IP address of the destination network. The IP
address for a default route is 0.0.0.0.
 Network Mask— Subnet mask of the destination network.
 Next Hop— IP address of the next hop to the route.
 AD— Value of the administrative distance specified to the route.