Allied Telesis AT-FS970M Series - Manual (Page 213)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
213
Disabling 802.1x Port-based Authentication on the Switch
To disable the 802.1x port-based Authentication feature on a switch, do
the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68 on page 182.
2. From the Security tab drop-down menu, select 802.1x Port
Authentication.
The 802.1x Authentication page with the Status field set to “Enabled” is
displayed. See Figure 82.
Figure 82. 802.1x Authentication Page with Status Enabled
3. Use the pull-down menu next to the Status field to select “Disabled.”
4. Click Apply.
5. Click SAVE to save your changes to the startup configuration file.