Allied Telesis AT-FS970M Series - Manual (Page 272)

Chapter 23: Setting Dynamic Routes Using RIP
272
Displaying RIP Statistics
To display counters for RIP packets on the switch, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 116.
Figure 116. Layer 3 Tab
2. From the Layer 3 tab drop-down menu, hover the cursor over RIP,
move the cursor to the right, and select Statistics from the RIP drop-
down menu.
The RIP statistics page is displayed. See Figure 117.
Figure 117. RIP Configuration Page
The following fields are displayed:
 Input— Counters displayed under these columns are for incoming
RIP packets.
 inResponses— Number of response packets received.