Allied Telesis AT-FS970M Series - Manual (Page 63)

63
Chapter 4
Setting Port Parameters
This chapter describes how to display and modify the port settings such as
back pressure and flow control. In addition, it provides procedures to
display and modify storm control settings.
This chapter contains the following sections:
 “Port Numbers on the Switch” on page 64
 “Displaying the Port Parameters” on page 65
 “Changing the Port Settings” on page 67
 “Displaying the Storm Control Settings” on page 71
 “Modifying the Storm Control Settings” on page 73
For additional information about the port parameters and the storm control
feature, see the following chapters in the AT-FS970M Series Version
2.3.1.0 Management Software Command Line Interface User’s Guide:
 Port Parameters
 Port Parameter Commands