Allied Telesis AT-FS970M Series - Manual (Page 143)

143
Chapter 12
Spanning Tree Protocols on the Switch
This chapter provides a brief description of both the Spanning Tree
Protocol (STP) and the Rapid Spanning Tree Protocol (RSTP), and
explains how to set the spanning tree protocols on the switch. See the
following sections:
 “Overview” on page 144
 “Displaying and Modifying Spanning Tree Protocol Settings on the
Switch” on page 145
Note
For information about how to set a spanning tree protocol on the
ports, see Chapter 7, “Spanning Tree Protocol on a Port” on page
93.
For more information about spanning tree, see the following chapters in
the AT-FS970M Series Version 2.3.1.0 Management Software Command
Line Interface User’s Guide:
 Spanning Tree and Rapid Spanning Tree Protocols
 Spanning Tree Protocol (STP)
 STP Commands
 Rapid Spanning Tree Protocol (RSTP)
 RSTP Commands