Allied Telesis AT-FS970M Series - Manual (Page 245)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
245
Adding a Static Route
To add a static route, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 98 on page 244.
2. From the Layer 3 tab drop-down menu, select Static Routes.
A list of static routes is displayed. See Figure 99 on page 244.
3. Click Add.
The Add Static Route Page is displayed. See Figure 100.
Figure 100. Add Static Route Page
4. Enter the destination network address in the Network Address field.
5. Enter the subnet mask of the destination network in the Network Mask
field.
6. Enter the IP address of the next hop in the Next Hop field.
7. Enter the value of the metric for the route in the AD field. The range is
1 to 255.
The field is optional. The default is 1.