Allied Telesis AT-FS970M Series - Manual (Page 54)

Chapter 3: Basic Switch Parameters
54
Figure 18. User Management Page with Change Password Tab
4. Use the pull-down menu next to the User Name field to select a
username.
The username must already exist.
5. Enter a new password in plaintext in the New Password field.
A password can consist of up to 16 alphanumeric characters and is
case-sensitive. Spaces and special characters are not allowed.
6. Re-enter the new password in the Confirm New Password field.
7. Click Set Password.
8. Click SAVE to save your changes to the startup configuration file.
Changing the
User Privilege
To change a privilege of a user, do the following:
1. From the home page, hover the cursor over the System tab.
2. From the System tab drop-down menu, select User Management.
The User Management page is displayed. See Figure 17 on page 52.
3. From the User Management page, select the Change Privilege tab.
The User Management page with the Change Privilege tab is
displayed. See Figure 19 on page 55.