Allied Telesis AT-FS970M Series - Manual (Page 277)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
277
Displaying the ARP Table
To display the ARP table, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 119.
Figure 119. Layer 3 Tab
2. From the Layer 3 tab drop-down menu, select ARP Table.
The ARP table is displayed. See Figure 120.
Figure 120. ARP Table Page
The following fields are displayed:
 IP Address— IP address of the host that is connected to the
switch.
 MAC Address— MAC address of the host.
 VLAN— ID number of the VLAN where the host is a member.
 Interface— Port number where the host is connected.
 Type— Type of the ARP entry: static or dynamic.