Allied Telesis AT-FS970M Series - Manual (Page 176)

Chapter 15: Power Over Ethernet (PoE)
176
Modifying PoE Settings on a Port
To display a list of the IPv4 interfaces, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 67.
2. From the Switching tab drop-down menu, select PoE.
A list of PoE settings on the ports is displayed. See Figure 66 on page
173.
3. From the PoE page, click Edit next to the port number that you want to
modify.
The following page is displayed. See Figure 67.
Figure 67. Modify Port PoE Settings Page
4. Change the following fields as needed:
 Interface— Indicates the port ID.
 PoE Port Status— Enable or disable the PoE port status.