Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 108)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 108 of 146
Property Name Description Valid Values
in colon separated hex digit
notation, mask is 0..128.
This value can also be set to
"any".
Destination IP
Address
Specifies the destination IP address
(either host or subnet) of an IP
packet.
This can be set by entering an IPV4
or IPV6 address using the following
format:
•
IPv4 address[/mask] - IPv4 is
in dotted decimal notation,
mask is 0..32.
•
IPv6 address[/mask] - IPv6 is
in colon separated hex digit
notation, mask is 0..128.
This value can also be set to
"any".
Destination IPX
Address
Specifies the destination network
address of an IPX packet.
This can be set by entering an 8 digit
hexadecimal value. (00000001-
FFFFFFFF)
This can also be set to "any".
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet.
This can be set by entering a 4-byte
hexadecimal value (0000-FFFF) or by
selecting one of the following:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN
•
any
Destination IPX
Socket
Specifies the destination IPX socket
number of an IPX packet.
This can be set by entering a 4-byte
hexadecimal value (0000-FFFF) or by
selecting one of the following:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN