Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 139)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 139 of 146
Property Name Description Valid Values
This can also be set by entering a 2-
byte hexadecimal value (0000-FFFF).
Destination IPX
Socket
Specifies the destination IPX socket
number of an IPX packet.
This can be set by selecting any of
the following values:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN
•
any
This can also be set by entering a 2-
byte hexadecimal value (0000-FFFF).
MAC Type Specifies whether the packet is a
Layer 2 unicast (L2UCAST) or any
other packet (L2BMCAST).
•
L2UCAST
•
L2MBCAST
•
any
Protocol Specifies the protocol of the packet. This can be set by selecting any of
the following values:
•
IP
•
IPX
•
NONIPIPX
•
SNA PATH CONTROL
•
PROWAY-LAN
•
EIA-RS
•
PROWAY
•
IPX 802.2
•
NETBEUI
•
ISO CLNS IS
•
IP ETHII
•
X.75 INTERNET
•
NBS INTERNET
•
ECMA INTERNET
•
CHAOSNET
•
X.25 LEVEL 3
•
ARP
•
XNS COMPAT
•
BANYAN SYSTEMS
•
BBN SIMNET
•
DEC MOP DUMP/LD
•
DEC MOP REM CONS
•
DEC DECNET