Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 45)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 45 of 146
Property Name Description Valid Values
•
802.2
•
802.2-Tagged
•
802.2-Untagged
•
EthII
•
EthII-Tagged
•
EthII-Untagged
•
NetwareRaw
•
NetwareRaw-Tagged
•
NetwareRaw-Untagged
•
SNAP
•
any
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
•
NNN.NNN.NNN.NNN
•
NNN.NNN.NNN.NNN/M
Where M = 0-32
Destination IP
Address
Specifies the destination IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
•
NNN.NNN.NNN.NNN
•
NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP This the Code Point bits of the
DiffServ field of an IP packet.
This can be set by entering one or
more integers from 0-63. Input can
be a comma separated list or a
range (specified as m-n) or a
combination of both. (e.g. 2, 4-7)
This value can also be set to "any".
IP Protocol This specifies a Layer 4 IP protocol
of an IP packet.
This can be set by selecting any of
the following values:
•
TCP
•
UDP
•
ICMP
•
IGMP
•
any
This can also be set by entering an
integer from 0-255.