Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 89)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 89 of 146
Property Name Description Valid Values
value of the bit at the same
position in the byte value is
used to determine a match.
A 0 in the mask means that
the corresponding bit is
ignored. The default is ff,
which means the classifier
matches against all bits in the
byte.
TCP Flags Specifies the TCP flags of an IPv4 or
IPv6 packet.
This can be set by selecting one or
more of the following values:
•
URG
•
ACK
•
RST
•
SYN
•
FIN
This can also be set to "any".
ICMP Type Specifies the ICMP type of an IPv4
packet.
This can be set by selecting any one
of the following values:
•
ECHORPLY
•
UNREACHABLE
•
QUENCH
•
REDIRECT
•
ECHO
•
ADVERTISEMENT
•
SOLICITATION
•
TIMEECXEED
•
PARAMETER
•
TSTAMP
•
TSTAMPRPLY
•
INFOREQ
•
INFOREP
•
ADDRREQ
•
ADDRREP
•
NAMEREQ
•
NAMERPLY
•
any
This can also be set by entering a
value from 0-255.
ICMP Code Specifies the ICMP code of an IPv4
packet.
This can be set by selecting any one
of the following values: