Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 24)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 24 of 146
SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or "Auth / Priv", you need to specify an
Authentication Password that is configured for the User Account Name on the
target device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol. This is
the available Privacy Protocol:
DES
Use Data Encryption Standard
Privacy Password
If the Security Level is "Auth / Priv", you need to specify a Privacy Password that is
configured for the User Account Name on the target device.
Login
User Name
This is the account name to be used to log in to the device. By default, this field is
set to manager.
Password
This is the password for the account to be used.
Retry
Timeout
The number of seconds QoS Manager waits before it determines that the device is
not responding. By default, this value is set to 5 seconds.
Count
The number of times QoS Manager sends SNMP messages to the agent before giving
up. By default, this value is set to 2 retries.
5.1.2 Close
This option closes the active connection with the device and empties the QoS/CoS
Information Window.
Note - This option is not available if QoS Manager is not yet connected to a device.