Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 35)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 35 of 146
6.2 AT-8600 Series
Topics:
•
Classifiers
•
Flow Groups
•
Traffic Classes
•
Policies
•
Ports
•
Scheduling
•
Quick Setup
•
Notes
6.2.1 Classifiers
6.2.1.1 QoS Information Window
Column Name Description
Classifier ID Lists the Rule ID of packet-matching rules available
6.2.1.2 Add/Modify Classifier
Property Name Description Valid Values
Rule ID
(cannot be
modified)
Uniquely identifies the packet-
matching rule
Range: 1-9999
VLAN Specifies the Destination VLAN that
the packet will be transmitted on.
This can be set by selecting from a
list of available VLANs or "any".
Egress Port Specifies the egress port on the
switch to match for each frame.
This can be set by selecting any of
the following values:
•
1-N (where N is the number
of ports available on the
device)
Ingress Port Specifies the ingress port on the
switch to match for each frame.
This can be set by selecting any of
the following values:
•
1-N (where N is the number
of ports available on the
device)
Ethernet Format Specifies the Ethernet encapsulation
type of the packet.
This can be set by selecting any of
the following values: