Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 82)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 82 of 146
•
The current firmware version returns the Protocol parameter as a numeric value.
However, QoS Manager provides descriptive names to make it easier for users to
set the appropriate value.
•
The current firmware version does not allow 'Source L4 Mask' and 'Destination L4
Mask' classifier properties to accept its minimum value of '0000'. As a result, both
CLI and QoS Manager only accept '0001' as its minimum value.
•
Values entered for the DTC Storm Rate attribute of policy property are
automatically rounded off to the nearest multiple of 1,000 kbps for 'Mbps' and
1,000,000 kbps for 'Gbps'.
•
Values entered for the Storm Rate attribute of policy property are automatically
rounded off to the nearest multiple of 1,000 kbps for 'Mbps' and 1,000,000 kbps for
'Gbps'.
•
Values entered for the Maximum and Minimum Burst Size attribute of policy
property are automatically rounded off.
•
Values entered for the Default Traffic Class Maximum and Minimum Burst Size
attribute of policy property are automatically round off to bytes.
•
Values entered for the Default Traffic Class Maximum and Minimum Bandwidth of
policy property are automatically round off.
•
When setting the Default Traffic Class Action policy property to
'FORWARD,SENDMIRROR', the current firmware version omits the value
'FORWARD'. As a result, both CLI and QoS Manager return the value
'SENDMIRROR' when retrieved.
6 Device Support