Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 128)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 128 of 146
Property Name Description Valid Values
This can also be set by entering a 1-
to 5- byte hexadecimal value (00-
FFFFFFFFFF).
Frame Relay Data
Link Connection
ID
Specifies the identification number
of a Frame Relay Data Link
Connection (DLC).
Range: any, 0-1023
PPP Index Specifies the PPP interface number. This can be set by selecting a pre-
defined PPP interface ID number.
PPP Protocol ID Specifies the network layer protocol
of the PPP encapsulated packet.
This can be set by selecting any of
the following values:
•
IP
• OSI
• DEC
• APP
• IPX
• VJC
• VJU
• BRI
• MP
• IP6HC
• ENC
• IPv6
• SINGLE
• Compressed
•
any
This can also be set by entering a 4-
byte hexadecimal value (00000000-
FFFFFFFF).
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of an IP
packet
This can be set by entering an IPV4
or IPV6 address using the following
format:
•
IPv4 address[/mask] - IPv4 is
in dotted decimal notation,
mask is 0..32.
•
IPv6 address[/mask] - IPv6 is
in colon separated hex digit
notation, mask is 0..128.
This value can also be set to
"any".
Destination IP
Address
Specifies the destination IP Address
(either host or host/subnet) of an IP
packet
This can be set by entering an IPV4
or IPV6 address using the following
format: