Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 37)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 37 of 146
Property Name Description Valid Values
IP Type of Service Specifies the value of the
precedence field within the TOS
(Type of Service) byte of an IP
packet.
Range: any, 0-7
Destination IPX
Address
Specifies the destination network
address of an IPX packet.
This can be set by entering a 4-byte
hexadecimal value. (00000001-
FFFFFFFF)
This can also be set to "any".
IPX Packet Specifies the value of the Packet
Type field of an IPX packet.
This can be set by entering a 2-byte
hexadecimal value (00-FF) or
selecting from the following:
•
NLSP
•
RIP
•
SAP
•
SPX
•
NCP
•
NETBIOS
•
any
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet.
This can be set by entering a 2-byte
hexadecimal value (0000-FFFF) or by
selecting one of the following:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN
•
any
Destination IPX
Socket
Specifies the destination IPX socket
number of an IPX packet.
This can be set by entering a 2-byte
hexadecimal value (0000-FFFF) or by
selecting one of the following:
•
NCP
•
SAP
•
RIP
•
NNB
•
DIAG
•
NLSP
•
IPXWAN
•
any