Allied Telesis AlliedView-EMS 4.0.2 QoS-Manager - Manual (Page 130)

AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 130 of 146
Property Name Description Valid Values
This can also be set by entering a 4-
byte hexadecimal value (00-FF).
IP Protocol Specifies a Layer 4 IP protocol of an
IP packet
This can be set by selecting any of
the following values:
•
TCP
•
UDP
•
NONTCPUDP
•
ICMP
•
IGMP
•
OSPF
•
any
This can also be set by entering an
integer from 0-255.
ICMP Type Specifies the ICMP message type to
match against the ICMP type field in
an ICMP packet header.
Range: any, 0-65535
ICMP Code Specifies the ICMP message reason
code to match against the ICMP
code field in an ICMP packet
header.
Range: any, 0-65535
TCP Flags Specifies the TCP flags of the
TCP/IP packet.
This can be set by selecting one or
more of the following values:
•
URG
•
ACK
•
RST
•
SYN
•
FIN
This can also be set to "any".
Source TCP Port Specifies the TCP source port of a
TCP/IP packet.
Range: any, 0-65535 or a port range
(n-m).
Destination TCP
Port
Specifies the TCP destination port
of a TCP/IP packet.
Range: any, 0-65535 or a port range
(n-m).
Source UDP Port Specifies the UDP source port of a
TCP/IP packet.
Range: any, 0-65535 or a port range
(n-m).
Destination UDP
Port
Specifies the UDP destination port
of a TCP/IP packet.
Range: any, 0-65535 or a port range
(n-m).
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet
This can be set by entering a 4-byte
hexadecimal value (0000-FFFF) or by
selecting one of the following:
•
NCP