Power zoom function, E –18, Flash photography support functions – Nikon SB-910 User Manual

Page 100

Advertising
background image

E–18

E

Functions

Flash Photography Support Functions

Power zoom function

The SB-910 automatically adjusts the zoom head position to match the lens focal
length.

• Zoom head positions automatically adjusted differ depending on the settings. For

more details, refer to “Specifications.” (0H-17)

Power zoom function activated

Power zoom function activated

Zoom head position manually
set
Power zoom function canceled
(zoom head position must be
manually set)
Nikon Diffusion Dome attached
Built-in wide panel in use
Zoom head position at the
maximum wide-angle position
Zoom head position at the
maximum telephoto position

Setting the zoom head position manually

■

In order to change the zoom head position to one that does not match the focal
length, the zoom head position must be adjusted manually.

An “

•

” above the “

” indicator appears on the LCD panel when the

zoom head position is set manually.
Press function button 1 to highlight the zoom head position and then rotate the

•

selector dial to set the zoom head position.
Rotate the selector dial clockwise to increase the value, and counterclockwise to

•

decrease the value.
The zoom head position can also be adjusted with function button 1. In this case,

•

the value increases each time function button 1 is pressed. Note that the value
returns to the widest angle value after the highest telephoto value has been
reached.
In order to reactivate the power zoom function, press function button 1 to display

•

“

” and then press function button 2.

Advertising