Nikon SB-910 - Manual (Page 57)

C–18
C
Flash Modes
Repeating Flash Mode
In repeating fl ash mode, the SB-910 fi res repeatedly during a single exposure,
creating stroboscopic multiple-exposure effects.
Be sure to use fresh or fully charged batteries and allow enough time for the flash •
unit to recycle between each repeating flash session.
Because of the lower shutter speeds, use of a tripod is recommended to prevent
•
camera/flash unit shake.
Insufficient flash output for correct exposure is not indicated in repeating flash
•
mode.
Setting repeating flash mode
Press the [MODE] button.
Rotate the selector dial to
display .
Press the [OK] button.
Repeating flash mode LCD example
Flash output level
Frequency of fl ash fi rings
Effective fl ash output
distance (numerical
indicator)
Effective fl ash output distance (T)
Number of fl ash
fi rings