Flash modes for remote flash units, D –14 – Nikon SB-910 User Manual

Page 75

Advertising
background image

D–14

D

Wireless Multiple Flash-unit Photography

Flash modes for remote flash units

When used in remote mode, the SB-910 can operate in AUTO (auto), M (manual)
and OFF (fl ash function canceled) modes.

To set the fl ash mode, press the [MODE] button,
choose the fl ash mode with the selector dial,
and then press the [OK] button.

(auto) mode:

In AUTO mode, the remote flash units start and stop firing in sync with the

•

master flash unit.
Total flash output level of the master and remote flash units is controlled.

•

The maximum distance the SB-910’s light sensor can detect is approx. 7 m (23 ft)

•

in front of the master flash unit.

(manual) mode:

In M mode, the remote flash units start firing in sync with the master flash unit,

•

but do not stop firing in sync with the master flash unit.
Flash output levels of the master and remote flash units are separately set.

•

The maximum distance the SB-910’s light sensor can detect is approx. 40 m

•

(131 ft) in front of the master flash unit.
The flash output level can be set from M1/1 to M1/128.

•

( flash function canceled) mode:

Remote fl ash units do not fi re, even when the master fl ash unit fi res.

Advertising