C –17, Manual flash mode, Flash modes – Nikon SB-910 User Manual

Page 56: Setting the ■ fl ash output level

Advertising
background image

C–17

C

Flash Modes

Manual Flash Mode

Setting the

■

fl ash output level

Highlight the fl ash output level, and then rotate the selector dial to change the
fl ash output level.

1/1

1/1

–0.3
–0.7

+0.7
+0.3

–0.3
–0.7

+0.7
+0.3

–0.3
–0.7

+0.7
+0.3

–0.3
–0.7

+0.7
+0.3

–0.3
–0.7

+0.7
+0.3

1/2

1/2

1/8

1/8

1/16

1/32

1/64

1/4

1/4

1/16

1/32

1/64

1/128

1/128

–0.3
–0.7

+0.7
+0.3

Flash output level: large

Selector dial rotated

counterclockwise

Selector dial rotated

clockwise

Flash output level: small

When the selector dial is rotated counterclockwise, the indicated denominator

•

increases (flash output level decreases). When the selector dial is rotated
clockwise, the indicated denominator decreases (flash output level increases).
The flash output level changes in ±1/3 EV steps except between 1/1 and 1/2.

•

1/32 −0.3 and 1/64 +0.7 represent the same flash output level.
In default setting, the flash compensation step between 1/1 and 1/2 is ±1 EV

•

step. This step can be changed to ±1/3 EV steps in the custom settings (0B-17).
With some cameras, and when using higher shutter speeds with a flash output
level higher than M1/2, actual flash output may decrease to M1/2 level.

Advertising