Af-assist illumination, E –19 – Nikon SB-910 User Manual

Page 101

Advertising
background image

E–19

E

Functions

Power zoom function canceled

■

Power zoom function can be canceled in the custom settings. (0B-18)

An “

•

” above the “

” indicator appears on the LCD panel when the

power zoom function is canceled.
The zoom head position must be manually set. The zoom head position does not

•

automatically change when the lens focal length is changed, the lens is replaced
or the Speedlight is turned off/on.
To set the zoom head position manually, see “Setting the zoom head position

•

manually” above.

AF-assist illumination

When light is too low for normal autofocus operation, the SB-910’s AF-assist
illumination enables autofocus photography.

The SB-910’s AF-assist illumination is compatible with the multi-point AF system.

•

AF-assist illumination cannot be used with non-CLS-compatible cameras and

•

COOLPIX cameras.

Notes on using the AF-assist illumination

■

AF-assist illumination can be used if an AF lens is mounted and the camera’s

•

focus mode is set to S (single-servo AF with focus priority), AF-A, or AF.
The effective flash-to-subject distance with AF-assist illumination is approx. 1 m

•

to 10 m (3.3 ft to 33 ft) for the center of the image with a 50 mm f/1.8 lens. The
flash-to-subject distance varies depending on lens in use.
Suitable lens focal length is between 17 mm and 135 mm. Focus points for each

•

focal length in which autofocusing is possible are:
D3 series camera focus points

17 – 19 mm

20 – 105 mm

106 – 135 mm

AF-assist illuminator will not light up if the camera’s focus is locked or the

•

SB-910’s flash-ready indicator does not come on.
Refer to the camera user’s manual for more information.

•

Advertising