Step, Basic operations – Nikon SB-910 User Manual

Page 25

Advertising
background image

B–6

B

Operation

This section covers basic procedures in i-TTL mode in combination with a CLS-
compatible camera.

v

Notes on continuous fl ash photography

To prevent the SB-910 from overheating, allow it to cool down for at least

•

10 minutes after 15 times of continuous firing.
When continuous flash firing is repeated in quick succession, the internal safety

•

function adjusts the recycling time by up to 15 seconds. If flash firing continues,
the thermal cut-out indicator appears on the LCD and all operations except
power ON/OFF and custom settings are suspended. (0E-23) Allow it to cool
down for several minutes to disable this function.
The conditions under which the internal safety function is activated differ

•

depending on the temperature and the SB-910 flash output level.
For use with High-performance Battery Pack SD-9 (optional), see “Using High-

•

performance Battery Pack SD-9.” (0H-11)

STEP

1

Inserting the batteries

Slide the battery chamber cover

open while pressing the battery
chamber cover lock release.

Insert the batteries following the

[+] and [−] marks.

Close the battery chamber cover.

Basic Operations

Advertising