Nikon SB-910 User Manual

Page 7

Advertising
background image

A–7

A

Preparation

i-TTL mode

■

Flash mode in which the Speedlight fi res monitor pre-fl ashes and the camera
measures the refl ected light and controls the Speedlight fl ash output

Monitor pre-fl ashes

Scarcely visible fl ashes emitted before actual fi ring that enable the camera to
measure the light refl ected on a subject

i-TTL balanced fi ll-fl ash

i-TTL mode type in which fl ash output level is adjusted to well-balanced
exposure of the main subject and background

Standard i-TTL

i-TTL mode type in which fl ash output level is adjusted to the correct exposure
of the main subject regardless of background brightness

Auto aperture fl ash mode

■

Non-TTL auto fl ash mode with aperture priority; the Speedlight measures the
refl ected fl ash and controls the fl ash output according to the refl ected fl ash data
and the lens and camera information

Non-TTL auto fl ash mode

■

Auto fl ash mode without TTL; the Speedlight measures the refl ected fl ash and
controls the fl ash output according to the refl ected fl ash data

Distance-priority manual fl ash mode

■

Manual fl ash mode with distance priority; the fl ash-to-subject distance is set and
the Speedlight fl ash output level is adjusted in accordance with the camera settings.

Manual fl ash mode

■

Flash mode in which the fl ash output level and aperture are manually set to obtain
the desired exposure

Repeating fl ash mode

■

Flash mode in which the Speedlight fi res repeatedly during a single exposure to
create stroboscopic multiple effects

Advertising