Step – Nikon SB-910 User Manual

Page 28

Advertising
background image

B–9

B

Operation

Basic Operations

Detaching the SB-910 from the camera

Make sure the SB-910 and

the camera body are turned
off, turn the lock lever 90° to
the left, and then slide the
SB-910’s mounting foot from
the camera’s accessory shoe.

If the SB-910’s mounting foot cannot be removed from the camera’s accessory

shoe, turn the lock lever 90° to the left again, and slide the SB-910 slowly out.
Do not forcibly remove the SB-910.

STEP

3

Adjusting the flash head

Adjust the fl ash head to

the forward-facing position
while holding down the fl ash
head tilting/rotating lock
release button.

The flash head is locked when tilted

90° up or set in the forward-facing
position.

LCD indicator for flash head status

Flash head is set in the forward-facing
position.

Flash head is set at angle. (Flash head
is tilted up or rotated to the right or
left.)

Flash head is tilted down.

Advertising