Iso sensitivity manual setting, Test firing, Modeling illumination – Nikon SB-910 User Manual

Page 103: E –21

Advertising
background image

E–21

E

Functions

ISO sensitivity manual setting

ISO sensitivity can be set manually in the custom settings. (0B-19)

ISO sensitivity can be set at from 3 to 8000. Note that the camera’s ISO sensitivity

•

setting is given priority.

Test firing

Pressing the test fi ring button determines whether the SB-910 fi res properly.

Test firing and modeling illumination can be selected in the custom

•

settings. (0B-17)
The flash output level during test firing varies depending on settings and

•

flash mode.
Test firing is not possible when the SB-910 is used in master mode.

•

Modeling illumination

When the test fi ring button is pressed, the fl ash fi res repeatedly at a reduced fl ash
output level. This is useful for checking the illumination and shadows cast on a
subject before actually taking the picture.

Test firing and modeling illumination can be selected in the custom

•

settings. (0B-17)
The flash fires as a modeling illuminator for up to approx. 1.5 seconds.

•

When the depth-of-field preview button on a camera compatible with

•

modeling illumination is pressed, modeling illuminator fires even when
the SB-910 is not set to modeling illumination. For details, see the camera
user’s manual.

Advanced Wireless Lighting

■

(0D-8)

When the master flash unit’s test firing button is pressed, activated flash units fire

•

as modeling illuminators at the fixed flash output level.
When the camera’s depth-of-field preview button is pressed, the master flash

•

unit (with the flash function activated) and all other remote flash units fire as
modeling illuminators at the set flash output level at the selected mode.

Advertising